Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Belta Vios
  6. : How do you replace the V-belt on the Toyota Vios?

Toyota Belta Vios - Video tutorial

Model: Toyota Belta Vios Xp90 - Years 2005-2012
Part: V-belt
Operation: How do you replace the V-belt on the Toyota Vios?

In order to replace the V-belt on the Toyota Vios, you need to go and open the bonnet so that you can access the components inside the engine compartment: the belt will be on the left side of the engine block and it will be possible to access it by unscrewing the bolts that fix it. the water pump pulley. In this way the tension of the belt will be reduced and it will be possible to remove it from its housing, so that it can be replaced with a new spare part. After the new belt has been inserted, you will be able to verify that everything is working properly.


Posted on 26 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos