Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Dashboard Panel of the Toyota Belta?

Model: Toyota Belta Vios Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Dashboard

See other generations:
Video tutorial

To remove the center dashboard panel of the Toyota Belta, you need to detach the cover located at the bottom of the panel, immediately behind the gear shift lever. Then, you can proceed to remove the trim pieces located on the sides of the panel and at the top. After removing these trim pieces, you can unscrew the screws underneath so that the panel can be detached.

By disconnecting the connectors at the back, the panel can be completely removed from its housing and replaced with a new one.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Toyota Belta?
Where are the fuses located in the Toyota Belta?
Toyota Belta Vios (2005-2012 / Xp90) The fuse boxes of the Toyota Belta serve to contain the fuses that manage the operation of the devices installed on the car. In this type of vehicle,…
How to Remove the Front Bumper of the Toyota Belta Vios?
How to Remove the Front Bumper of the Toyota Belta Vios?
Toyota Belta Vios (2005-2012 / Xp90) To remove the front bumper of the Toyota Belta Vios, open the hood to access the screws that secure the bumper from the top. Once these screws are lo…
How to Replace the Battery in a Toyota Belta Vios?
How to Replace the Battery in a Toyota Belta Vios?
Toyota Belta Vios (2013-2023 / Xp150) To replace the battery in a Toyota Belta Vios, open the hood to access the components inside the engine compartment. The battery is located on the ri…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos