Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit Roof Bars on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Roof rack bars

See other generations:
Video tutorial

In this video guide, learn how to fit universal roof bars on a Toyota Yaris. Universal roof bars are used by those who do not have roof rails (fixed bars secured to the car roof) on which to attach the bars.

Install the bar kit as shown in the video, using bars calibrated to the width of the car. Place the brackets at both ends of the doors, and once you have measured the width of the anchoring brackets (place a rubber square under the metal bracket that rests directly on the bodywork), tighten the pins with the butterfly bolt until fully secured and aligned on the car roof.

Finally, fit the safety caps on both sides.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Toyota Yaris
How to replace the cabin air filter of the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) These brief and simple instructions will show us how to disassemble and replace the cabin air filter or pollen filter of the Toyota Yaris. First of a…
Resetting the Service Light on a Toyota Yaris
Resetting the Service Light on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) When it is time for a service on the Toyota Yaris, a light appears on the dashboard to alert you. After completing all the necessary operations, you …
How to Replace the Key Battery of a Toyota Yaris
How to Replace the Key Battery of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Start by inserting the tip of a flathead screwdriver into the slot on the side of your Toyota Yaris key and lever it open. Then, detach and remove th…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos