Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light on the Toyota Yaris XP90

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Tail light

See other generations:
Video tutorial

The rear light on the Toyota Yaris, like other parts of the exterior bodywork, is exposed to impacts that can cause it to break. In this case, proceed with its replacement.

Open the boot, stand in front of the light to be replaced, and locate a small ribbed panel on the inner wing which you will remove using a plastic lever. Inside the compartment, there are two bolts that you will undo using a ratchet spanner.

Grip the outer body of the light and pull it out, overcoming the resistance of the retaining clips, then disconnect the electrical connector and remove the old light unit. Connect the new light and reassemble by reversing the steps.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

How to Change the Rear Light Bulbs on a Toyota Yaris
How to Change the Rear Light Bulbs on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Are the rear light bulbs on your Toyota Yaris not working? Learn in this video how to replace the bulbs. Open the boot lid, remove the plastic panel …
Replacing the Rear Light on a Toyota Yaris
Replacing the Rear Light on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Is the rear light on your Toyota Yaris due for replacement? Here’s how to remove it from the car. Open the boot lid, then remove the plastic cover lo…
Removing the Rear Light on a Toyota Yaris
Removing the Rear Light on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video tutorial, you will learn how to remove the rear light of a second-generation Toyota Yaris. First, open the boot lid and remove the side…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos