Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the tire pressure warning light on the Toyota Land Cruiser?

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part: Tire pressure warning light

The procedure to reset the tire pressure warning light on the Toyota Land Cruiser requires first checking that all tires are at the correct inflation pressure, as indicated on the sticker located on the driver's side door pillar. To proceed with the reset operation, you must turn on the instrument panel and hold down the SET button, located at the bottom of the steering column, near the brake pedal. You must hold down the button until the light flashes and then turns off; at this point, you can also turn off the instrument panel.

Posted on 6 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Toyota Land Cruiser (2021-2026 / J300) To reset the tire pressure warning light of the Toyota Land Cruiser, first inflate the tires until they reach the recommended pressure value: this ca…
Toyota Land Cruiser (2007-2021 / J200, MK 11) To completely make the tire pressure warning light of the Toyota Land Cruiser disappear, you need to inflate the tires until they reach the recommend…
Toyota Land Cruiser (2007-2021 / J200, MK 11) In this tutorial, you will see how to reset the tyre warning light on a Toyota Land Cruiser, a very simple and quick operation, to be done only once …

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos