Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Setting the Time on the Toyota Yaris MK2

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Clock

See other generations:
Video tutorial

In this video, see how to reset the clock to the correct time if you need to disconnect the car battery for electrical work on the Toyota Yaris. To do this, turn on the instrument panel, press the "clock" button located between the two air vents on the dashboard for a few seconds.

You will see the hour digits start to flash; release the button and then press it until the correct digit appears. Wait a few seconds, and the hour digits will stop flashing and the minute digits will start flashing; press the button to display the correct digit, and release the button to complete the operation.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

How to Change the Time on the Toyota Yaris Instrument Cluster
How to Change the Time on the Toyota Yaris Instrument Cluster
Toyota Yaris (2005-2011 / Xp90) Today's guide will show you the steps to adjust the time on the instrument cluster of the Toyota Yaris. First, get in the car and turn on the instrum…
How to Set the Time on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) Below are the main instructions to change the time on the display of the instrument cluster in a Toyota Yaris. First, get in the vehicle and turn on …
How to set the time on the display of the Toyota Yaris instrument panel
How to set the time on the display of the Toyota Yaris instrument panel
Toyota Yaris (2005-2011 / Xp90) Today's information will allow us to reset the service light for the regular maintenance of the engine oil change in the Toyota Yaris. First, we get …

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - How to adjust the time in the Toyota Yaris Hybrid? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos