Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disable the TPMS light on the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Tire pressure warning light

See other generations:
Video tutorial

Today we will explain how to deactivate the TPMS light on the Toyota Yaris. When you have replaced the tires from summer to winter ones, it is possible that the sensor is not present and for this reason the tire pressure warning light continues to come on. To deactivate the light, we must remove the panel located under the steering wheel and disconnect the connector.

Remove the plastic and cut the gray wire. Connect the gray wire to the red wire and insert the plastic.

Reconnect the connector and close the panel. You will immediately notice that when you turn on the instrument panel, the tire pressure warning light will be off.


Posted on 30 December 2024 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota Yaris
How to Reset the Tyre Pressure Warning Light on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) This brief and simple guide explains how to reset the tyre pressure monitoring system (TPMS) warning light on a Toyota Yaris. Before performing the r…
How to reset the tire pressure warning light on the Toyota Yaris.
How to reset the tire pressure warning light on the Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) These brief and simple steps will illustrate how to reset the tire pressure warning for the Toyota Yaris. Before performing the reset of the TPMS sen…
Resetting the TPMS Light on the Toyota Yaris
Resetting the TPMS Light on the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) Today's guide will illustrate the steps to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris; before performing the reset, e…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos