Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the license plate bulbs of the Toyota RAV4 MK4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: License plate light

The rear license plate lamps of the Toyota RAV4 can burn out over time and use, if this happens we must replace them as soon as possible to drive safely and avoid a fine. To change them, we open the rear hood, using a plastic lever we remove the panel in the center of the door to access the bulb sockets. We disconnect the electrical connector of the lamp to be replaced, rotate the socket to remove it, remove the 5w bulb and replace it with a new one, put back the socket, insert the connector and close the panel.

Posted on 12 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlights bulbs in the Toyota RAV4?
How to replace the headlights bulbs in the Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this tutorial, we can see how to replace the front headlight bulbs in the Toyota RAV4, an extremely simple and quick operation. First of all, make…
Replacing Front Headlight Bulbs on Toyota Rav4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Replacing the front headlight bulbs on a Toyota Rav4? Remove and replace the bulbs. Open the bonnet and use a lever to remove the plastic cover of th…
How to Replace the Fog Light Bulbs on a Toyota RAV4?
How to Replace the Fog Light Bulbs on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this tutorial, you will learn how to replace the fog light bulbs on a Toyota RAV4, a very simple and quick operation. First, ensure that the key i…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos