Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light on a Toyota Rav 4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: License plate light

See other generations:
Video tutorial

Replace the damaged number plate bulbs on a Toyota Rav 4. Use a plastic lever to remove the protective cover above the rear tailgate. Access the back of the number plate light located in the tailgate of the car. Pull out the bulb holder (using your hands), then disconnect the bulb from it. Fit the new/LED bulb (same size and voltage) into the holder, then refit the light into the tailgate pressing until the clips lock into place.

Finally, test the correct operation of the bulb. Close the inspection cover of the tailgate.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Light on Toyota Rav 4
How to Replace the Number Plate Light on Toyota Rav 4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Are the number plate light bulbs blown? Here’s how to remove them on a Toyota Rav 4. Use a plastic lever to remove the transparent lens of the number…
How to Replace the Number Plate Bulb on a Toyota RAV 4?
How to Replace the Number Plate Bulb on a Toyota RAV 4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To replace the number plate bulb on a Toyota RAV 4, detach the light unit containing the bulb from its housing using a tool like a screwdriver. Once …
How to Replace the Number Plate Light on a Toyota Rav4
How to Replace the Number Plate Light on a Toyota Rav4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) A small tip that will help you sleep soundly. You can remove the bulb housing in such a simple and quick manner that you won't even need any specific…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos