Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light of the Toyota Sienna

Model: Toyota Sienna Xl30 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: License plate light

See other generations:
Video tutorial

Today we will explain how to replace the license plate light of the 2011 Toyota Sienna. To replace the bulb, we need to open the vehicle's trunk and use a flathead screwdriver to remove the tailgate panel.

Insert the flathead screwdriver into the top left corner and detach the tailgate, being careful not to damage the hooks. The license plate light is located in the center, so to replace the bulbs we need to rotate the bulb counterclockwise and remove it from the hole.

Install the new bulb into the socket and insert it into the hole by rotating it clockwise. Reattach the tailgate and close the trunk.


Posted on 15 February 2025 by ScegliAuto


Related tutorials

How to replace the key battery in the Toyota Sienna?
How to replace the key battery in the Toyota Sienna?
Toyota Sienna (2004-2010 / Xl20) If you own a Toyota Sienna and want to learn how to correctly replace the key battery, simply follow the steps outlined below. First, obtain a flat s…
How to replace the battery in the remote control of the 2021 Toyota Sienna.
How to replace the battery in the remote control of the 2021 Toyota Sienna.
Toyota Sienna (2021-2026 / Xl40) To correctly replace the battery inside the key of your 2021 Toyota Sienna, simply follow the steps outlined in this new guide. First, purchase a new…
Replacing the Battery in the Key Remote of a Toyota Sienna
Replacing the Battery in the Key Remote of a Toyota Sienna
Toyota Sienna (2021-2026 / Xl40) Today's instructions will allow us to disassemble and replace the battery in the key remote of a Toyota Sienna. First, take the remote in hand and st…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos