Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the side turn signal bulb of the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Side marker bulb

See other generations:
Video tutorial

Today we will explain how to replace the side turn signal bulb on the Toyota Yaris. To replace the bulb, we need to remove the small headlight from its housing using a flat-head screwdriver.

Disconnect the connector in order to remove it completely. The Toyota parent company suggests replacing the entire headlight, but since it has a certain cost, it is also possible to only replace the bulb.

So, we open the headlight and replace the bulb, then close the headlight by spreading glue or resin around the edge in order to seal it. To avoid not being able to close the headlight properly, we can purchase the entire headlight and install it on the vehicle.

Connect the connector to the headlight and insert it into the appropriate hole.


Posted on 15 February 2025 by ScegliAuto


Related tutorials

How to replace the turn signal bulb of the Toyota Yaris side mirror
How to replace the turn signal bulb of the Toyota Yaris side mirror
Toyota Yaris (2020-2026 / MK 4) In this guide, we will see the instructions that will allow us to disassemble and replace the turn signal bulb of the Toyota Yaris side mirror. First…
Replacing the Rear Headlamp Bulb on a Toyota Yaris
Replacing the Rear Headlamp Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Today, learn how to remove and replace the rear headlamp bulb on a first-generation Toyota Yaris. First, open the boot and remove the plastic side co…
How to Remove the Rear Light Bulb on a Toyota Yaris
How to Remove the Rear Light Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Before you can start, open the tailgate of your Toyota Yaris. Begin by unclipping the clips that secure the internal cover on the side of the boot. N…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos