Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Toyota RAV 4?

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

In order to reset the Service light of the Toyota RAV 4, you need to turn on the instrument panel by inserting the key into the corresponding slot. Once the panel is on, you can navigate to the menu that appears on the instrument panel until you see the "Trip A" option.

When this appears, you should turn off the panel and hold down the button to its left with the panel off. Continue holding it down, then insert the key into the slot and turn it to turn on the panel again. After a few seconds, you will notice that the Service light will disappear completely.


Posted on 4 April 2025 by ScegliAuto


Related tutorials

How do you reset the Service light on the Toyota RAV 4?
How do you reset the Service light on the Toyota RAV 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) On the instrument panel of the Toyota RAV 4, the Service light that appears can be reset by turning on the instrument panel and navigating through th…
How to Reset the Service Light on a Toyota RAV4
How to Reset the Service Light on a Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) You can clear the Service light displayed on the instrument panel of the Toyota RAV4 by turning on the ignition and then pressing the button to acces…
How to Reset the Service Light on a Toyota RAV 4?
How to Reset the Service Light on a Toyota RAV 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To reset the Service light on a Toyota RAV 4, turn on the ignition and navigate through the menu using the controls on the left side of the steering …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos