|
Do it yourself
| |||
| ||||
How to reset the "Service" light on a Toyota 4Runner?
Model: Toyota 4runner
N280
- Years 2010-2024
To reset the "Service" light on a Toyota 4Runner, start by turning on the instrument panel without starting the engine. Press the button below the instrument panel, usually located near the odometer, repeatedly until the maintenance settings screen appears on the display. Once in the correct menu, locate the option for resetting service intervals. When you see the maintenance reset option, press and hold the same button until a confirmation of the reset completion appears on the display. This will indicate that the procedure has been done correctly and the "Service" light should turn off, indicating that the system has recorded the new maintenance interval. It is essential to perform the reset every time a service or scheduled maintenance is completed, so that the system can properly monitor future maintenance intervals. If the light does not turn off, repeat the procedure making sure you have followed the steps correctly.
Posted on 11 April 2025 by ScegliAuto
Video tutorial
Related tutorials
Toyota 4runner
(2002-2009 /
N210)
Let's briefly go over the procedure to reset the service light for routine oil change maintenance on a Toyota 4Runner. First, get inside the vehicle …
Toyota 4runner
(2002-2009 /
N210)
In this tutorial, you will learn how to reset the service light on a Toyota 4Runner. This operation is extremely simple and quick, and should only be…
Toyota 4runner
(2002-2009 /
N210)
As we can see in this tutorial, resetting the service light on a Toyota 4Runner is very simple. Of course, this procedure should only be performed af…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
