Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob of the Toyota Corolla Axio

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Shift knob

See other generations:
Video tutorial

If the gear knob in your Toyota Corolla Axio is too worn out and you want to replace it with a new one, then all you have to do is pay attention to the procedure described below and apply it step by step. First, purchase a new knob that is perfectly compatible with your Toyota Corolla Axio, then enter the cabin and remove the old knob by unscrewing it counterclockwise.

Once removed, install the new one by turning it clockwise and make a few test gear changes to make sure the installation was successful.


Posted on 30 April 2025 by ScegliAuto


Related tutorials

How to Remove and Replace the Gear Knob on a Toyota Corolla
How to Remove and Replace the Gear Knob on a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) This guide illustrates the main steps to remove and replace the gear knob of the automatic gearbox on a Toyota Corolla. First, get into the vehicle a…
How to Replace the Gear Knob on the Toyota Corolla
How to Replace the Gear Knob on the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) These brief and simple steps will guide you through the process of removing and replacing the gear knob on the Toyota Corolla. First, get inside the …
Replacing the Gear Knob of the Toyota Corolla 3 Automatic
Replacing the Gear Knob of the Toyota Corolla 3 Automatic
Toyota Corolla (2006-2013 / MK 3) This video tutorial shows how to remove and replace the gear knob of the third series Toyota Corolla automatic, following the instructions below. Fir…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos