Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob of the Toyota Corolla 3 Automatic

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Shift knob

See other generations:
Video tutorial

This video tutorial shows how to remove and replace the gear knob of the third series Toyota Corolla automatic, following the instructions below. First, get in the vehicle and start by unscrewing the gear knob counterclockwise to remove it; then remove the plastic side cover of the centre console to access the lower part of the lever.

At this point, refit everything and insert the new gear knob, this time screwing it in clockwise; tighten it well to prevent the knob from unscrewing during driving.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Knob of the Toyota Corolla Automatic
How to Remove the Gear Knob of the Toyota Corolla Automatic
Toyota Corolla (2019-2026 / MK 5, E210) In today's video tutorial, see how to remove and replace the gear knob of the Toyota Corolla automatic, following these simple and quick steps. First…
Replacing the Manual Gear Knob on a Toyota Corolla
Replacing the Manual Gear Knob on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Do you want to replace the manual gear knob on a Toyota Corolla? Here’s how to do it: unscrew the knob by hand and remove it from the gear lever. Use…
How to Remove the Gear Knob on a Toyota Corolla
How to Remove the Gear Knob on a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Want to replace the gear knob on a Toyota Corolla? Here's how to disassemble it. Use a plastic lever to detach the leather gaiter: pull the gaiter do…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos