Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Gear Knob on a Toyota Corolla

Model: Toyota Corolla MK 4, E170, E160 - Years 2013-2019
Part: Shift knob

This guide illustrates the main steps to remove and replace the gear knob of the automatic gearbox on a Toyota Corolla. First, get into the vehicle and start by detaching the gaiter from the knob by lowering it; then, unscrew the gear knob counter-clockwise, removing it from the lever, as shown in the video. At this point, install the new gear knob (in this case, a new knob with an adapter is being installed); finally, refit the gaiter onto the new knob!

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on a Toyota Corolla
How to Replace the Gear Knob on a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) .. In this brief and simple guide, you will learn how to remove and replace the gear knob on a Toyota Corolla. First, get into the car and remove the small.. …
How to replace the gear knob of the Toyota Corolla Axio
How to replace the gear knob of the Toyota Corolla Axio
Toyota Corolla (2013-2019 / MK 4, E170, E160) If the gear knob in your Toyota Corolla Axio is too worn out and you want to replace it with a new one, then all you have to do is pay attention to t…
How to Replace the Gear Knob on the Toyota Corolla
How to Replace the Gear Knob on the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) These brief and simple steps will guide you through the process of removing and replacing the gear knob on the Toyota Corolla. First, get inside the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos