Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the gear knob on the Toyota Corolla?

Model: Toyota Corolla MK 4, E170, E160 - Years 2013-2019
Part: Shift knob

To remove the gear knob from the Toyota Corolla, grasp the old knob so that it can be removed from the top of the corresponding lever; once it is detached, use a tool to pry off the clips located at the base of the leather cover. When both parts have been removed, reposition the cover around the lever so that it clips onto the underlying clips; finally, reposition the gear knob on top.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Corolla (2013-2019 / MK 4, E170, E160) This guide illustrates the main steps to remove and replace the gear knob of the automatic gearbox on a Toyota Corolla. First, get into the vehicle a…
Toyota Corolla (2000-2007 / MK 2) These brief and simple steps will guide you through the process of removing and replacing the gear knob on the Toyota Corolla. First, get inside the …
Toyota Corolla (2006-2013 / MK 3) This video tutorial shows how to remove and replace the gear knob of the third series Toyota Corolla automatic, following the instructions below. Fir…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos