Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensors of the Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part:

The instructions in this guide will allow us to reset the tire pressure warning on the Toyota Yaris; before resetting the TPMS sensors, it is necessary for all four tires to be at the correct pressure. Then, we get into the car and start the ignition; after that, we press and hold the TPMS reset button located below the steering wheel, on the driver's side, until the tire pressure warning is reset on the instrument panel. Finally, we turn off the ignition and start the engine!

Posted on 13 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light in the Toyota Yaris?
How do you reset the tire pressure warning light in the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) Even the Toyota Yaris, in its most recent versions, is equipped with tire pressure monitoring sensors. They are installed in the tire and signal when…
How to reset the tire pressure warning on the Toyota Yaris
How to reset the tire pressure warning on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) These short and simple instructions will show us how to reset the tire pressure warning of the Toyota Yaris; before resetting the TPMS sensors, it is…
How to restore the tire pressure warning on the Toyota Yaris
How to restore the tire pressure warning on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Below we will discover the information that will allow us to reset the tire pressure warning of the Toyota Yaris; before performing the reset of all …

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What to do in case of tire warning light on Toyota Yaris? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos