Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the alternator belt of the Toyota Camry 3.0i V6

Model: Toyota Camry Xv20 - Years: 1997, 1998, 1999, 2000, 2001
Part: V-belt

See other generations:
Video tutorial

Today we will discover the instructions and procedure on how to disassemble and replace the serpentine belt or alternator belt of the Toyota Camry 3.0i V6. First, we open the hood of the car and start by disconnecting the battery; then we loosen the alternator bolts, so we can remove the belt from the various pulleys, as shown in the video.

At this point, we replace and install the new serpentine belt, installing the original one; make sure that the new belt is perfectly inserted between the various pulleys, following the video tutorial until the end!


Posted on 16 June 2025 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Toyota Camry
How to Replace the Timing Belt on a Toyota Camry
Toyota Camry (1997-2001 / Xv20) Replacing the timing belt is a process that requires attention and patience. Follow the main steps below to remove it from the Toyota Camry. First, o…
When and How to Replace the Timing Belt on the Toyota Camry 2.2L
When and How to Replace the Timing Belt on the Toyota Camry 2.2L
Toyota Camry (1997-2001 / Xv20) Today's main instructions will show you useful information for removing and replacing the timing belt on the Toyota Camry 2.2L. For this engine type,…
How to Replace the Alternator in a Toyota Camry?
How to Replace the Alternator in a Toyota Camry?
Toyota Camry (2006-2013 / Xv40) In this tutorial, you will see how to replace the alternator in a Toyota Camry, a very simple task if you have good manual skills. First, ensure the …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos