Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Toyota Camry

Model: Toyota Camry Xv20 - Years 1997-2001
Part: Timing belt

Replacing the timing belt is a process that requires attention and patience. Follow the main steps below to remove it from the Toyota Camry. First, open the hood of your car and start loosening the tensioner for the alternator belt to remove it. Next, disconnect the electrical connectors and remove the bolts from the alternator, as shown in the video. At this point, remove the timing cover and then take out the thermostat. Take the necessary references to replace the timing belt, following the video tutorial to the end!

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

When and how to replace the timing belt of the Toyota Camry 2.2L
When and how to replace the timing belt of the Toyota Camry 2.2L
Toyota Camry (1997-2001 / Xv20) Today's main instructions will show us the useful information for disassembling and replacing the timing belt of the Toyota Camry 2.2L; on this type …
Guide to Replacing the Timing Belt on the Toyota Camry 2.2L
Guide to Replacing the Timing Belt on the Toyota Camry 2.2L
Toyota Camry (1997-2001 / Xv20) Below are the instructions that will allow you to remove and replace the timing belt on the Toyota Camry 2.2L. First, open the hood of the vehicle an…
How to replace the alternator belt of the Toyota Camry 3.0i V6
How to replace the alternator belt of the Toyota Camry 3.0i V6
Toyota Camry (1997-2001 / Xv20) Today we will discover the instructions and procedure on how to disassemble and replace the serpentine belt or alternator belt of the Toyota Camry 3.…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos