Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

To make the tire pressure warning light disappear from the Toyota Aygo instrument panel, you will need to inflate the tires to the recommended pressure value: this value will be indicated on the sticker attached to the driver's door pillar. After inflating, you will need to go inside the cabin and turn on the instrument panel by turning the key: you will now need to open the glove compartment located on the front passenger side.

Inside, there will be the button with the icon of low pressure, which must be held down to turn off the warning light.


Posted on 3 July 2025 by ScegliAuto


Related tutorials

Resetting the tire pressure warning light on the Toyota Aygo
Resetting the tire pressure warning light on the Toyota Aygo
Toyota Aygo (2021-2026 / MK 3, Aygo X) The activation of the tire pressure warning light indicates a possible puncture in one or more tires; let's see how to reset the TPMS sensors on the …
How to reset the tire pressure warning light on the Toyota Aygo X.
How to reset the tire pressure warning light on the Toyota Aygo X.
Toyota Aygo (2021-2026 / MK 3, Aygo X) These brief and simple steps will allow us to reset the tire pressure warning light on the Toyota Aygo X after restoring the pressures on all four ti…
How do you reset the tire pressure light on the Toyota Aygo X?
How do you reset the tire pressure light on the Toyota Aygo X?
Toyota Aygo (2021-2026 / MK 3, Aygo X) To reset the tire pressure warning light on the Toyota Aygo X, you need to inflate the tires until they reach the recommended pressure value: this wi…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos