Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the tire pressure warning light on the Toyota Yaris.

Model: Toyota Yaris MK 4 - Years 2020-2026
Part:

Shortly we will see the instructions that will allow us to reset the tire pressure warning of the Toyota Yaris; before resetting the TPMS sensors, it is necessary that all four tires are at the correct pressure. So, we get into the car and start the instrument panel; then we find the TPMS sensor reset button on the dashboard, next to the steering wheel, as shown in the video. At this point, we hold down the reset button for a few seconds until the tire pressure warning light is reset.

Posted on 10 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (2011-2019 / Xp130) These short and simple steps will show us how to reset the tire pressure warning light (TPMS) on the Toyota Yaris; before resetting the light, it is …
Toyota Yaris (2011-2019 / Xp130) Today we will discover the steps that will show us how to reset the tire pressure warning light (TPMS) of the Toyota Yaris; before performing the res…
Toyota Yaris (2011-2019 / Xp130) This short guide shows the procedure to reset the tyre pressure warning light (TPMS) on the Toyota Yaris; before performing the operation, ensure all…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What to do in case of tire warning light on Toyota Yaris? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos