Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Damaged Radio Antenna on Your Toyota Prius

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Antenna

See other generations:
Video tutorial

Do you want to replace the damaged radio antenna on your Toyota Prius and don't know how to proceed? Follow these very simple steps. After purchasing the new antenna (with the same size and thread as the original), unscrew the old one by hand until it completely detaches from its base.

Take the new antenna and screw it into the plastic base on the roof of your car (tighten until fully secured). Finally, check the proper functioning of the antenna by turning on the radio and receiving channels.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to disassemble the antenna of the Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) In this short guide, we will see the instructions for disassembling and replacing the antenna of the Toyota Prius car radio. First, move to the rear …
Antenna Replacement on Toyota Prius
Antenna Replacement on Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) Open the boot and remove the three round clips securing the headlining using a plastic lever. Once done, undo the 10 mm bolt securing the antenna cab…
Where to Find the OBD Port of the Toyota Prius 2
Where to Find the OBD Port of the Toyota Prius 2
Toyota Prius (2009-2015 / Xw30, MK 2) To locate the OBD port inside your Toyota Prius second generation, follow the steps outlined in this guide. First, get into the car and reach the dri…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos