Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Antenna Replacement on Toyota Prius

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Antenna

See other generations:
Video tutorial

Open the boot and remove the three round clips securing the headlining using a plastic lever. Once done, undo the 10 mm bolt securing the antenna cable and disconnect it. At this point, you can unscrew the 22 mm bolt that secures the antenna from underneath and remove it from outside the vehicle.

As you can see, this is not a complex operation. For reassembly, proceed in reverse order, inserting the new antenna into place and securing it from underneath, then reconnect the connector and secure it. Good luck!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to disassemble the antenna of the Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) In this short guide, we will see the instructions for disassembling and replacing the antenna of the Toyota Prius car radio. First, move to the rear …
How to Replace the Damaged Radio Antenna on Your Toyota Prius
How to Replace the Damaged Radio Antenna on Your Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) Do you want to replace the damaged radio antenna on your Toyota Prius and don't know how to proceed? Follow these very simple steps. After purchasing…
How to Replace the Radio Antenna on a Toyota Prius
How to Replace the Radio Antenna on a Toyota Prius
Toyota Prius (2004-2009 / MK 1) Let's see how to replace the radio antenna on a Toyota Prius along with the mounting base. Lift the rear tailgate, lever between the bodywork and the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos