Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the T-belt indicator on the Toyota Hilux

Model: Toyota HiLux MK 7, An10, An20, An30 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Warning light – error code

See other generations:
Video tutorial

In this video, we see how to reset the warning light for the replacement of the timing belt (T-Belt) on the Toyota Hilux: first, make sure that the odometer displays the total mileage, then turn off the ignition. Press and hold the partial odometer button, then turn on the ignition while holding the button.

After a few seconds, a number will appear, usually 15. Release the button and press it again to set the desired mileage for the next reminder (for example, 15 for 150,000 km). Hold the button until the number disappears, then turn off the ignition.


Posted on 11 October 2025 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Toyota Hilux 3.0 D-4D
Replacement of the timing belt of the Toyota Hilux 3.0 D-4D
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) Let's see how to disassemble and replace the timing belt of the Toyota Hilux 3.0 D-4D. First, open the hood of the vehicle and remove the upper engin…
How do you turn off the T-BELT light on a 1997 Toyota Hilux?
How do you turn off the T-BELT light on a 1997 Toyota Hilux?
Toyota HiLux (1988-1997 / N80, N110, N90, N100) To turn off the T-BELT light, you need to use the button located inside the display, near the dashboard. First, turn on the car, but do not start the…
How to reset the T-belt warning light on the Toyota Hilux
How to reset the T-belt warning light on the Toyota Hilux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) In this video we can see how to reset the timing belt warning light (also known as the "T-belt light") on the dashboard of a Toyota Hi-lux MK7: we ne…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos