Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the T-belt warning light on the Toyota Hilux

Model: Toyota HiLux An30, An20, MK 7, An10 - Years 2005-2015
Part: Timing belt

In this video we can see how to reset the timing belt warning light (also known as the "T-belt light") on the dashboard of a Toyota Hi-lux MK7: we need to turn off the instrument panel, and then press the button/wheel located on the right side of the speedometer, next to the display. Hold it down for a few seconds, and then turn on the instrument panel. Keep holding it down and then release the button. The number 15 will appear on the display: this number corresponds to 150,000 km, which is the distance at which we need to replace the belt. Press again and it will start from 1, which corresponds to 10,000 km; go back to 15 and hold it down until the mileage reappears. Start the engine, and see that the light has turned off.

Posted on 26 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota HiLux (2005-2015 / An30, An20, MK 7, An10) In this video, we see how to reset the warning light for the replacement of the timing belt (T-Belt) on the Toyota Hilux: first, make sure that the o…
Toyota HiLux (2015-2024 / An130, An120, MK 8) To reset the tire pressure warning light of the Toyota Hilux, you need to inflate the tires until they reach the recommended pressure value: this val…
Toyota HiLux (2015-2024 / An130, An120, MK 8) To reset the AdBlue warning light on a Toyota Hilux, you need to add the necessary amount of additive fluid into the corresponding tank. First, open …

Other guides you may be interested in

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos