|
Do it yourself
| |||
| ||||
How to change the rear bulbs of the Toyota Proace Verso
Model: Toyota Proace Verso
MK 1
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
Let's see how to change the bulbs of the rear lights of the Toyota Proace Verso: we will have to remove the rear lights by removing the two Torx T30 screws. One is clearly visible at the top, while the other is under the lower panel; unlock the side clips with a plastic tool and disconnect the electrical connector. Once the light is removed, unlock the 3 rear hooks (2 side and 1 central) and remove the internal illuminating body. Replace the bulbs, which are not interchangeable, and each has its own type. Before reassembling, always test the operation, insert the housing correctly, screw in the 2 torx screws and check for tightness and operation.
Posted on 18 October 2025 by ScegliAuto
Related tutorials
Toyota Proace Verso
(2016-2026 /
MK 1)
Today's main steps will allow us to reset the AdBlue fluid top-up warning on the Toyota Proace Verso. First, we get on board the vehicle and start th…
Toyota Proace Verso
(2016-2026 /
MK 1)
These brief and simple steps will illustrate the procedure to follow to reset the AdBlue liquid top-up warning of the Toyota Proace Verso. In order t…
Toyota Proace Verso
(2016-2026 /
MK 1)
Today we will see how to reset the trip information for Trip A and Trip B of the Toyota Proace Verso, produced from 2016 to 2024. Let's turn on the i…
Other guides you may be interested in
|
How to Open the Bonnet of a Toyota C-HR
To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
