Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Toyota Proace van?

Model: Toyota Proace Verso MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

Video tutorial

In this tutorial, we can see how to replace the cabin filter in the Toyota Proace van, a very simple and quick operation. First of all, let's go inside the cabin, then position ourselves below the dashboard and locate the long rectangular door located in the joint between the dashboard itself and the central tunnel.

Next, open the door by unlocking the clip, remove the old filter, and clean the housing from any dirt residue. At this point, all that remains is to insert the replacement filter and reassemble everything following the reverse procedure.


Posted on 1 November 2025 by ScegliAuto


Related tutorials

How to change the cabin filter of the Toyota Proace
How to change the cabin filter of the Toyota Proace
Toyota Proace Verso (2016-2026 / MK 1) In this video we can see how to change the cabin filter of the Toyota Proace. The filter is located behind the glove compartment, so to access it you…
How to replace the cabin filter in the Toyota Proace Verso van?
How to replace the cabin filter in the Toyota Proace Verso van?
Toyota Proace Verso (2016-2026 / MK 1) In this tutorial, we will see how to replace the cabin filter in the Toyota Proace Verso van, a very simple and quick operation. First, let's go to t…
How to Reset the Tyre Pressure Warning Light on a Toyota Proace?
How to Reset the Tyre Pressure Warning Light on a Toyota Proace?
Toyota Proace Verso (2016-2026 / MK 1) To reset the tyre pressure warning light on a Toyota Proace, first inflate all tyres to the correct pressure: this value is indicated on the sticker …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos