Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on a Toyota Auris?

Model: Toyota Auris E180 - Years 2012-2018
Part:

You can completely turn off the tire pressure warning light that appears on the instrument panel of the Toyota Auris by turning the key to activate the display without starting the car. Next, you need to open the glove compartment located on the passenger side: on the right side of the glove compartment, there will be a button with the symbol for low tire pressure and the word SET. You must press and hold the button for a few seconds: this will cause the warning light to blink three times until it is completely deactivated. To verify the reset of the warning light, you can turn off and then turn on the display again.

Posted on 22 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Toyota Auris?
How to Reset the Tyre Pressure Light on a Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the tyre pressure light on the Toyota Auris, inflate the tyres to the recommended pressure value, which is indicated on the sticker affixed …
How to Reset the Tyre Pressure Warning Light on a Toyota Auris
How to Reset the Tyre Pressure Warning Light on a Toyota Auris
Toyota Auris (2012-2018 / E180) This guide explains how to reset the tyre pressure monitoring system (TPMS) warning light on a Toyota Auris. Before performing the reset, ensure all …
How to Reset the Tyre Pressure Warning Light on a Toyota Auris?
How to Reset the Tyre Pressure Warning Light on a Toyota Auris?
Toyota Auris (2012-2018 / E180) You can completely clear the tyre pressure warning light on a Toyota Auris by first inflating the tyres to the optimal pressure value: this value wil…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos