Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Toyota Auris?

Model: Toyota Auris E210 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the Toyota Auris, you need to turn on the ignition so that you can see the corresponding light is active; then, you must bring all the tyres to the inflation pressure value indicated on the sticker affixed to the driver's door pillar.

This will allow you to open the glove compartment on the passenger side and locate the reset button on its left inner side; the button must be held down until the light on the dashboard turns off.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on the Toyota Auris?
How to reset the tyre pressure warning light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the tyre pressure warning light on the Toyota Auris, turn on the instrument panel after all tyres have been inflated to the correct pressure…
How to reset the tyre pressure warning light on the Toyota Auris?
How to reset the tyre pressure warning light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the tyre pressure warning light on the Toyota Auris, turn the ignition on without starting the engine. Next, open the glove compartment loca…
How to Reset the Tyre Pressure Warning Light on a Toyota Auris
How to Reset the Tyre Pressure Warning Light on a Toyota Auris
Toyota Auris (2012-2018 / E180) This guide explains how to reset the tyre pressure monitoring system (TPMS) warning light on a Toyota Auris. Before performing the reset, ensure all …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos