|
Do it yourself
| |||
| ||||
How to activate or deactivate the traction control of the Toyota Aygo
Model: Toyota Aygo
Ab40, MK 2
- Years 2014-2023
To activate or deactivate the traction and stability control on the Toyota Aygo, secure the vehicle and turn on the ignition. The control is located on the driver's side, near the other buttons (such as those for the mirrors), and is recognizable by the icon of a car that is "skidding." Press the button to change the system's status: confirmation comes from the instrument panel, where a warning or dedicated light appears. To reactivate the control, press the same button again and check the panel to see if the warning turns off or if the system returns to normal status. If a brief press does not produce the desired effect on your configuration, consult the vehicle manual: on some versions, complete deactivation may require a prolonged press or specific conditions (for example, the vehicle being stationary).
Posted on 15 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Aygo
(2021-2026 /
MK 3, Aygo X)
It will be possible to completely reset the Service light of the Toyota Aygo X by turning on the instrument panel and inserting the ignition key into…
Toyota Aygo
(2005-2014 /
MK 1, Ab10)
The reset of the Service light in the Toyota Aygo, but in general for any car, must be the result of carrying out scheduled maintenance and changing …
Toyota Aygo
(2005-2014 /
MK 1, Ab10)
To disable the immobiliser on a Toyota Aygo, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashb…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Cabin Filter on the Opel Grandland X
If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.537
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |