Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuel Tank of a Toyota Prius

Model: Toyota Prius MK 3, Xw50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Fuel cap

See other generations:
Video tutorial

Today, we will explain how to open the fuel tank on a Toyota Prius vehicle. To open the tank, pull the release lever located on the front left of the driver's seat.

Once pulled, the fuel flap will open. Unscrew the fuel cap counterclockwise to refuel.

After refuelling, screw the cap back on clockwise and push the fuel flap closed. If the fuel cap does not open, it may be necessary to spray some lubricant on it and wait a few minutes before trying to open it again.


Posted on 11 February 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump of the Toyota Prius
Replacing the Fuel Pump of the Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) Below are the steps to remove and replace the fuel pump of the Toyota Prius, following the instructions provided. To access the fuel pump, you will n…
How to Open the Boot of the Toyota Prius
How to Open the Boot of the Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) Opening and closing the front bonnet of the Toyota Prius is a simple and quick task that you can do yourself, aided by our short video tutorial. To o…
How to Open the Fuel Filler Cap on a Toyota Prius?
How to Open the Fuel Filler Cap on a Toyota Prius?
Toyota Prius (2016-2023 / MK 3, Xw50) In this tutorial, you will see how to open the fuel filler cap on a Toyota Prius, a very simple operation that follows the typical procedure of most …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos