Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump of the Toyota Prius

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuel pump

See other generations:
Video tutorial

Below are the steps to remove and replace the fuel pump of the Toyota Prius, following the instructions provided. To access the fuel pump, you will need to remove the petrol tank; raise the vehicle and disconnect the various pipes, unscrewing the screws to remove it, as shown in the video.

Next, unscrew the screws of the pump to remove it from the tank, disconnecting the hoses and wiring to replace it with the new one (installing the original), following the video tutorial to the end!


Updated on 20 August 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Filter on a Toyota Prius
How to Remove the Fuel Filter on a Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) How do you remove the fuel filter from your Toyota Prius? First, remove the rear seat cushions from the car. Use a socket spanner to unscrew the bolt…
How to Open a Stuck Fuel Door on a Toyota Prius?
How to Open a Stuck Fuel Door on a Toyota Prius?
Toyota Prius (2016-2023 / MK 3, Xw50) In this tutorial, see how to open the fuel door on a Toyota Prius, a very simple operation similar to the typical procedure for most vehicles. First,…
How to Replace the Fuel Filter on a Prius
How to Replace the Fuel Filter on a Prius
Toyota Prius (2004-2009 / MK 1) Replacing the fuel filter on a Toyota Prius? Remove the rear seat cushions to access the car's tank. Unscrew the securing bolts of the metal cap with…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos