Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Toyota Corolla

Model: Toyota Corolla MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Key

See other generations:
Video tutorial

To replace the battery in the remote key of a Toyota Corolla, locate the back of the remote and find the small screw that secures the shell. Using a suitable screwdriver, carefully undo this screw and gently open the shell to access the battery compartment.

Remove the exhausted battery and insert a new one of the same type, ensuring the correct polarity as indicated inside the compartment. Once the battery is in place, close the shell by aligning the two halves and reinsert the screw to secure it tightly.

Check the correct functioning of the remote by pressing the buttons to verify the opening and closing of the doors.


Posted on 21 March 2026 by ScegliAuto


Related tutorials

Battery Replacement for the Toyota Corolla
Battery Replacement for the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) In today's tutorial video, we will see how to remove and replace the battery in the Toyota Corolla, following the instructions below. First, open the…
How to Replace the Key Battery on a Toyota Corolla
How to Replace the Key Battery on a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Replacing the battery in your Toyota Corolla key takes just a few seconds and can be done independently. Follow the instructions provided here. First…
How to replace the battery of the Toyota Corolla key
How to replace the battery of the Toyota Corolla key
Toyota Corolla (2000-2007 / MK 2) The steps to replace the battery of the Toyota Corolla remote control are simple and quick to perform. Before proceeding, let's get a CR 2032 model b…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos