Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Toyota Corolla battery replacement

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Battery
Operation: Toyota Corolla battery replacement

In today's video tutorial we will see how to disassemble and replace the Toyota Corolla battery, following the instructions below. First we open the bonnet of our car and begin to disconnect both battery terminals (positive and negative pole), using a 10 mm socket wrench; then unscrew the fixing screws of the central battery bracket, using the same key, as shown in the video. At this point we remove and replace the battery with the new one, having the same amperage; reassemble the battery and connect it!


Posted on 27 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos