Do it yourself
Frequently asked questions about cars and motorcycles

Diagram and Positioning of the Fuse Boxes of the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuse box

See other generations:
Video tutorial

Today’s information will show you how to access the fuse box of the Toyota Yaris, including the diagram and layout. First, open the vehicle's bonnet and start removing the plastic cover located at the bottom left on the driver's side, accessing the relays and internal fuses; find the external fuse box in the engine compartment by removing the cover located at the top right, as shown in the video.

Usually, the covers contain the fuse diagram, which can also be found in the vehicle's user and maintenance manual.


Posted on 22 March 2026 by ScegliAuto


Related tutorials

Toyota Yaris (2011-2019 / Xp130) In this video tutorial, we will see the positioning of the fuse boxes and their diagram for the Toyota Yaris. First, open the bonnet and locate the e…
Toyota Yaris (2005-2011 / Xp90) .. This guide provides instructions regarding the diagram and positioning of the fuse boxes of the Toyota Yaris. First, open the vehicle's bonnet and start.. …
Toyota Yaris (2005-2011 / Xp90) In this brief guide, we will look at the diagram and placement of the fuse boxes for the Toyota Yaris. First, get inside the vehicle and start by rem…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos