Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Toyota Prius

Model: Toyota Prius Xw30, MK 2 - Years 2009-2015
Part:

Today, you will see the instructions that will allow you to reset the tyre pressure warning light on the Toyota Prius; before performing the TPMS reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition; next, press and hold the TPMS reset button located under the glove compartment until the warning on the instrument display resets correctly. After that, turn off the ignition and start the engine, checking that the reset has been successful!

Posted on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota Prius?
How to Reset the Tyre Pressure Warning Light on a Toyota Prius?
Toyota Prius (2009-2015 / Xw30, MK 2) To reset the tyre pressure warning light on a Toyota Prius, first inflate the car's tyres to the correct pressure: once the tyres are inflated, enter…
How to Reset the Tyre Light on a Toyota Prius?
How to Reset the Tyre Light on a Toyota Prius?
Toyota Prius (2009-2015 / Xw30, MK 2) In this tutorial, we will see how to reset the tyre light on a Toyota Prius, a very simple and quick operation, to be done only after restoring the c…
How to Reset the Tyre Warning Light on a 2018 Toyota Prius
How to Reset the Tyre Warning Light on a 2018 Toyota Prius
Toyota Prius (2016-2023 / MK 3, Xw50) In this new guide, you will discover the various steps to manually reset the tyre warning light on your 2018 Toyota Prius. First, reach the driver's …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos