Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Rav4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

In today's article, we will see how to reset the oil change light, which is also the maintenance light. First, start the instrument panel, then press the display button located on the right side of the steering wheel and set the display to TRIP A. Now turn off the panel, hold down the display button, and restart the panel.

Once the panel is started, wait for the reset to complete, release the button, and restart the panel. As we have seen, the procedure takes little time to complete, and no tools or software are required.

It is recommended to perform this procedure only after having the oil change or service done at a garage.


Posted on 21 April 2026 by ScegliAuto


Related tutorials

How to reset the oil change on a 2014 Toyota RAV4
How to reset the oil change on a 2014 Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Through this very useful tutorial today, you will be able to see the necessary procedure to reset the engine oil change light on a 2014 Toyota RAV4. …
How to reset the oil change light on a 2015 Toyota RAV4
How to reset the oil change light on a 2015 Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this brief video guide, I will show you the procedure to reset the maintenance light related to the engine oil change on a Toyota RAV4. Start by t…
How to Reset the Oil Service in the Toyota RAV4?
How to Reset the Oil Service in the Toyota RAV4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this tutorial, you will see how to reset the oil service in the Toyota RAV4, an extremely simple and quick operation to be carried out only after …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos