Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change light on a 2015 Toyota RAV4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this brief video guide, I will show you the procedure to reset the maintenance light related to the engine oil change on a Toyota RAV4. Start by turning on the ignition without starting the engine, then press the "DISP" button located on the right side of the steering wheel until the "TRIP A" screen appears on the information display of the speedometer, and turn off the ignition.

Next, press and hold the "DISP" button and turn the vehicle's ignition back on, waiting with the button still pressed for the reset to complete as shown in the video.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Warning Light on a 2018 Toyota RAV4
How to Reset the Oil Warning Light on a 2018 Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) If you have just performed an engine oil change and replaced the oil filter on your 2018 Toyota RAV4 but the warning light continues to illuminate, d…
How to Reset the Service Light on the Toyota RAV4
How to Reset the Service Light on the Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Briefly, here are the instructions to reset the maintenance light for the oil change on the Toyota RAV4. First, get inside the vehicle and press and …
How to Reset the Oil Light of the 2023 Toyota RAV4
How to Reset the Oil Light of the 2023 Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) If you want to know how to manually reset the oil light of your new 2023 Toyota RAV4, follow these steps. First, turn on the ignition and press the m…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos