Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan in a Toyota Tacoma Pickup?

Model: Toyota Tacoma N170, N160, N150, N140, N190 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Blower motor

See other generations:
Video tutorial

In this tutorial, you will see how to replace the cabin fan in a Toyota Tacoma pickup, a very simple and quick operation. First, ensure that the instrument panel is off to work safely.

Then, go to the passenger side, position yourself under the glove compartment, and disconnect the fan's power connector. Next, detach the wiring, remove the three mounting screws using a T25 Torx wrench, and pull the fan out of the housing.

At this point, simply insert the replacement part and reassemble everything by following the reverse procedure.


Posted on 29 April 2026 by ScegliAuto


Related tutorials

How to reset the service light on a Toyota Tacoma pick-up?
How to reset the service light on a Toyota Tacoma pick-up?
Toyota Tacoma (2016-2026 / N300) In this tutorial, we can see how to reset the service in the Toyota Tacoma pick-up truck, an extremely simple and quick operation, to be carried out …
How to reset the service light on a Toyota Tacoma pickup truck?
How to reset the service light on a Toyota Tacoma pickup truck?
Toyota Tacoma (2016-2026 / N300) In this tutorial we can see how to reset the service in the Toyota Tacoma pick-up truck, an extremely simple and quick operation, to be carried out o…
Replacing the Cabin Fan Motor in the Toyota Tacoma
Replacing the Cabin Fan Motor in the Toyota Tacoma
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) In this video tutorial, we will go through the steps to remove and replace the cabin fan motor in the Toyota Tacoma. First, get inside the vehicle on…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos