Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location and Diagram of the Fuse Boxes in the Toyota Ist

Model: Toyota Urban Cruiser MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

In this video, see the location and diagram of the fuse box in the Toyota Ist, known in the European market as the Urban Cruiser. In left-hand drive vehicles, the fuse box is located in a compartment at the lower part of the dashboard, to the left of the steering wheel, while in right-hand drive vehicles, it is found inside the glove compartment, behind a panel.

Inside the engine bay, the fuse box is on the right side when looking at the vehicle from the front; there are also two relay boxes on the opposite side of the bay near the right shock absorber strut.


Posted on 8 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light in a Toyota Urban Cruiser?
How to Reset the Service Light in a Toyota Urban Cruiser?
Toyota Urban Cruiser (2009-2014 / MK 1) In this tutorial, you will see how to reset the service light in a Toyota Urban Cruiser, a very simple and quick operation to perform only after comp…
Guide to Replacing the Radio in the Toyota Urban Cruiser
Guide to Replacing the Radio in the Toyota Urban Cruiser
Toyota Urban Cruiser (2009-2014 / MK 1) In today's video, you will see the main steps to remove and replace the standard radio with a new multimedia system in the Toyota Urban Cruiser. Firs…
How do you turn off the traction control of the Toyota Urban Cruiser?
How do you turn off the traction control of the Toyota Urban Cruiser?
Toyota Urban Cruiser (2009-2014 / MK 1) It will be possible to deactivate the traction control of the Toyota Urban Cruiser by first inserting the ignition key into the corresponding slot, i…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos