Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blade of a Toyota Rav 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
Video tutorial

This video shows how to replace the front wiper blade of a Toyota Rav 4. Grasp the front wiper blade with your hands, pull it as shown in the video (use a screwdriver if needed) and detach it from the arm housing. Fit the new wiper blade onto the arm (if the blade is not original, you may need to fit an adapter if available), you will hear a click indicating it is securely attached.

Finally, lower the arm above the front wiper and test the new blade fitted earlier. It is always preferable to use original parts for better durability and quality.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper Blade on a Toyota Rav 4
How to Replace the Rear Wiper Blade on a Toyota Rav 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Watch this video to learn how to replace the rear wiper blade on a Toyota Rav 4. Grip the rear blade with your hands, pull it as shown in the video (…
How to Replace the Rear Wiper Blade on a Toyota Rav4?
How to Replace the Rear Wiper Blade on a Toyota Rav4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To replace the rear wiper blade on a Toyota Rav4, press the side tabs located at the cover of the wiper pin. This will allow you to lift the wiper ar…
Replacement of the Rear Windscreen Wiper Blade
Replacement of the Rear Windscreen Wiper Blade
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This video shows how to replace the rubber blade of the rear windscreen wiper on a Toyota Rav 4. After removing the wiper from the arm, pull the rubb…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos