Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Toyota Yaris?

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

To completely clear the Service light from the instrument cluster of the Toyota Yaris, press and hold the TRIP button located on the left spoke of the steering wheel while the ignition is off: continue holding the button while inserting the ignition key into the ignition switch and turning it to the on position.

When the ignition is on, continue to hold the TRIP button until the light disappears completely; at the end of the procedure, you can release the button and finish the reset.


Posted on 4 August 2026 by ScegliAuto


Related tutorials

How to reset the Service light on the Toyota Yaris?
How to reset the Service light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the Service light on the Toyota Yaris, turn on the ignition so you can navigate the menu that will appear on the display: select "Vehicle se…
How to Reset the Service Light on the Toyota Yaris Hybrid?
How to Reset the Service Light on the Toyota Yaris Hybrid?
Toyota Yaris (2020-2026 / MK 4) To reset the Service light on the Toyota Yaris Hybrid, turn the ignition key to the 'on' position to access the menu that will appear on the instrume…
How to reset the Service light on a Toyota Yaris?
How to reset the Service light on a Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) The Service light that appears on the instrument panel of the Toyota Yaris can be reset by pressing and holding the DISP button located on the right …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos