Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the interior light bulbs of the Toyota RAV 4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Interior dome light bulb

See other generations:
Video tutorial

In this brief guide, we will discover the instructions that will allow us to replace the interior light bulbs of the Toyota RAV 4. First, get inside the vehicle and start prying on the side of the plastic light cover to detach and remove it; this will give you access to the bulbs, as illustrated in the video.

At this point, pull out the faulty bulb from the holder, replacing it with a new one (of the correct type and with the same fitting); check its operation and finally reinstall the light cover.


Posted on 4 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulbs on a Toyota Rav 4
How to Replace the Front Headlamp Bulbs on a Toyota Rav 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) How to replace the front headlamp bulbs on a Toyota Rav 4? Open the bonnet by pulling the lever located at the bottom right of the dashboard and secu…
How to Replace the Headlight Bulbs on a Toyota Rav 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Let's see how to replace the bulbs located in the front headlight of a Toyota Rav 4. Open the bonnet by pulling the lever located at the bottom right…
Replacing the Rear Light on the Toyota RAV 4
Replacing the Rear Light on the Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Today we will discover the steps to remove and replace the rear light and its bulbs on the Toyota RAV 4. First, open the rear tailgate and start remo…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos