Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the 12V Battery in a Toyota Corolla Cross

Model: Toyota Corolla Cross - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

Video tutorial

In this guide, you will find instructions that will allow you to remove and replace the 12V battery in a Toyota Corolla Cross. First, open the bonnet of the vehicle and start by disconnecting both battery terminals (positive and negative), which are located on the right side; then unscrew the battery bracket screws, thus removing the battery from its compartment, as shown in the video.

At this point, install the new 12V battery of the correct type and with the same amperage as the original, following the video tutorial to the end!


Posted on 13 October 2026 by ScegliAuto


Related tutorials

How to Change the Battery in a Toyota Corolla Cross
How to Change the Battery in a Toyota Corolla Cross
Toyota Corolla Cross (2020-2026 / Xg10, MK 1) To replace the battery in a Toyota Corolla Cross, open the bonnet and locate the battery in the engine bay, generally on the right side. Turn off the…
Where is the Fuse Box Located in the Toyota Corolla Cross 2022?
Where is the Fuse Box Located in the Toyota Corolla Cross 2022?
Toyota Corolla Cross (2020-2026 / Xg10, MK 1) If you own a 2022 Toyota Corolla Cross and want to find out where the fuse box containing all the vehicle's fuses is located, read the following guid…
How to Replace the Remote Battery on the Toyota Corolla Cross?
How to Replace the Remote Battery on the Toyota Corolla Cross?
Toyota Corolla Cross (2020-2026 / Xg10, MK 1) To replace the battery in the remote for the Toyota Corolla Cross, slide the key out from the bottom of the device to leverage it open. This will all…

How to Change the Time on the Peugeot 208

Today's guide will show you how to set the clock on the Peugeot 208's onboard computer, following the instructions below. First, get in the car and turn on the instrument panel; then press and hold the settings button on the panel for a few seconds until the time starts to flash, as shown in the video. At this point, press the left button to correctly set the time, adjusting the hour first and then the minutes; exit the onboard computer menu to save all the changes made!

Watch the video!


by ScegliAuto

More videos