Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights in the Toyota Corolla Cross?

Model: Toyota Corolla Cross Xg10, MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light

Video tutorial

In this tutorial we can see how to replace the rear lights in the Toyota Corolla Cross, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that we can work safely, then open the trunk door, locate the two bolts along the inner edge of the headlight in question and unscrew them using a 10mm socket wrench.

Next, grab the headlight, pull it outwards and separate it from the bodywork. At this point, all that's left to do is disconnect the power connector and install the replacement following the reverse procedure.


Posted on 22 February 2025 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on the Toyota Corolla Cross?
How to Replace the Remote Battery on the Toyota Corolla Cross?
Toyota Corolla Cross (2020-2026 / Xg10, MK 1) To replace the battery in the remote for the Toyota Corolla Cross, slide the key out from the bottom of the device to leverage it open. This will all…
How to Remove the Rear Seat of a Toyota Corolla Cross
How to Remove the Rear Seat of a Toyota Corolla Cross
Toyota Corolla Cross (2020-2026 / Xg10, MK 1) These simple steps will allow you to remove the rear bench seat of a Toyota Corolla Cross. First, open the rear doors of the vehicle and start pullin…
Replacing the 12V Battery in a Toyota Corolla Cross
Replacing the 12V Battery in a Toyota Corolla Cross
Toyota Corolla Cross (2020-2026 / Xg10, MK 1) In this guide, you will find instructions that will allow you to remove and replace the 12V battery in a Toyota Corolla Cross. First, open the bonnet…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos