Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Headlamp Bulb

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear headlamp bulb, you must remove the headlamp itself: open the boot, ensuring it is securely supported, detach the plastic cover, unscrew the retaining nuts of the headlamp, and disconnect the connector attached to it. At this point, remove the headlamp from its housing and disconnect the bulb holder, replacing the damaged bulbs (bayonet fitting), reconnect the bulb holder to the headlamp, and reposition it in its housing by tightening the respective retaining nuts; reconnect the plug and then the plastic cover.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlamp Bulb on a Toyota Aygo
How to Replace the Rear Headlamp Bulb on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) If you need to replace the rear headlamp bulb on this vehicle, follow the instructions provided below and in the tutorial video. First, open the boot…
Replacing the front bulbs on a Toyota Aygo
Replacing the front bulbs on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) With the engine off and the handbrake engaged, lift the bonnet and secure it. To replace the main beam headlamp, disconnect the connector and unscrew…
How to Replace the Front Headlight Bulb on the Toyota Aygo?
How to Replace the Front Headlight Bulb on the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) To replace the front headlight bulb (for example, an H4 bulb), open the bonnet, locate the headlight and the corresponding bulb to be replaced, reach…

Where is the Reset Button for the Tyre Light on a Hyundai Ix35?

The instrument cluster of the Hyundai Ix35 is equipped with a tyre light that illuminates to alert the driver of low pressure in one or more tyres. In addition to simply having a flat tyre, there could also be a puncture or a malfunction of the monitoring sensor. Once the nature of the problem is determined and resolved, you can quickly reset the tyre light by pressing the button depicting a flat tyre, located on the left side of the steering wheel, for a few seconds, waiting for the warning to turn off on the instrument cluster.

Watch the video!


by ScegliAuto

More videos