Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Inner Panel of the RAV4

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Door trim panel

See other generations:
Video tutorial

Removing the door panel of the Volkswagen Passat? Remove the cover panel of the car door. Remove the cover of the handle/opening lever located on the panel.

Using a screwdriver, unscrew the securing screws located inside the panel. Once all screws are removed, detach the plastic clips that secure the door.

Pull the door panel away with your hands, disconnect any power connectors and release cable. Pull the panel away with your hands and disconnect it from the door (disconnect the power wiring and the opening cable).

Install a new door cover panel for the RAV4.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

Replacement of the radio antenna of the Toyota RAV4
Replacement of the radio antenna of the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) The following steps will show us how to disassemble and replace the car radio antenna of the Toyota RAV 4. To remove the antenna along with its base,…
How to Replace the Serpentine Belt on a Toyota RAV 4?
How to Replace the Serpentine Belt on a Toyota RAV 4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) You can replace the serpentine belt on the Toyota RAV 4 by lifting the car with a jack or ramp to completely remove the right front wheel. Once the w…
Removing the Alternator on Toyota RAV 4
Removing the Alternator on Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Removing the alternator from the Toyota RAV 4. Here's how to do it. Lift the bonnet and secure it, locate the battery and disconnect the terminals. R…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos