Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How can I remove the door panel on my Toyota Rav 4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 MK 5, Xa50 - Years 2019-2024
Part: Door
Operation: How can I remove the door panel on my Toyota Rav 4?

In this video we can see how it is possible to carry out a maintenance that appears difficult but in reality it is not at all. In fact, we will show you how to remove the door panel on Toyota Rav 4. First open the door, remove the plastic clip above the handle and unscrew the now uncovered screw. As shown in the video, remove the plastic under the handle with the connector and unplug it. Then with a plastic lever remove the plastic on your right and unscrew the two screws. At this point, all that remains is the small protection between the door and the window. Once removed, you can detach the panel.


Posted on 1 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Rav 4 2019-2026 - Why does the Toyota Rav 4 tailgate not open? Read Answer
    • Rav 4 2006-2013 - What to do when the trunk of the Toyota RAV4 does not open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos