Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Panel on the Toyota RAV4?

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Door trim panel

See other generations:
Video tutorial

To replace the door panel on the Toyota RAV4, first remove the panels located at the door pillars. Next, unscrew the screws positioned on the right side of the panel and around the internal handle.

Then, detach the trim above the armrest and unscrew the additional screws located beneath it. Now, you can remove the window switch panel by disconnecting its underlying connector. At this point, the door panel can be completely removed from the door and replaced with a new one.


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to replace the door panel on the Toyota RAV 4?
How to replace the door panel on the Toyota RAV 4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To replace the door panel on the Toyota RAV 4, first remove the trims located by the external mirror and along the grab handle. Then, proceed by extr…
Removing the Left Rear Door Panel on a Toyota Rav 4
Removing the Left Rear Door Panel on a Toyota Rav 4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Remove the battery terminals located in the engine bay. Remove the trim near the opening lever; using a screwdriver, unscrew the screws inside the ha…
How to Remove the External Door Handle of the Toyota RAV 4
How to Remove the External Door Handle of the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this short and simple guide, you will learn how to remove and replace the external door handle of the front door of the Toyota RAV 4. First, open …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos